REPAIR PARTS, ALL FAUCETS

592 found, showing page 12 of 15

DRAIN STRAINER

Fits over most drain outlets. Full 3-1/8" outside diameter, with clamp to fit the large and small drain outlets. Chrome-plated. Carded.

1-5/8-1-3/4VINYL STOPPER

Fine quality white rubber with brass ring. Maximum temperature: 190 F. 1 per card.

1-3/8-1-1/2VINYL STOPPER

Fine quality white rubber with brass ring. Maximum temperature: 190 F. 1 per card.

1-1/8-1-1/4VINYL STOPPER

Fine quality white rubber with brass ring. Maximum temperature: 190 F. 1 per card.

1-1/2" PLASTIC S/J NUT

Slip-joint nut plastic. Do it carded.

TUB STOPPER 1-1/2" TO 2"

Fits-all white rubber tub stopper with nickel-plated brass ring. For drains 1-1/2" and 2".

*KEY GAS 1/4X3"

Used to turn on gas line for free-standing gas heaters. Cast brass.

15" STOPPER CHAIN

Finest-quality brass chain, chrome-plated. Equipped with type B couplings on each end. 15" long.

LAVATORY STOPPER

Fits-all white rubber lavatory and basin stopper with nickel-plated brass ring. For drains 1" to 1-3/8" diameter.

WHT SPRAY HEAD

White finish plastic spray head attaches to existing hose to replace any automatic On/Off thumb control sink spray. 1 per card.

*WHT SPRAY HOLDER

White finish trim ring. Includes locknut. 1 per card.

*VALVE GT 2" T125

Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import.

CHR TUB SPOUT W/DIVERTER

1/2" F.I.P. inlet for long pipe nipple. Maximum 4-1/8" nipple length. Carded.

1-1/2" END OUTLET WASTE

1-1/2" x 16" furnished with tailpiece to provide slip-joint or direct connection to sink drain outlet. Tee has built-in sanitary baffle. Do it carded.

*PS2470 SADDLE TEE 1/2FIP*****

*PS2470 SADDLE TEE 1/2FIP*****

*KEY GAS 5/16X3"********

*KEY GAS 5/16X3"********

*TUB&SHOWER REPAIR KIT

Valve replacement kit for twin-handle washerless Private Label or Sterling Tub/Shower and 8" to 12" widespread faucets. Contains preassembled stem, O-ring and bushing, seal and spring assembly, preassembled renewable seat and O-ring, bonnet O-ring, 1 lubricant pack, and instructions. 1 kit per bag.

*STEM DELTA-PEERLS

Danco seat model No. 17834. Hot and cold 35-2H/C.

*VALLEY STEM*******

Danco seat model No. None. Hot and cold 3Z-6H/C.

FAUCET CONN 3/8FCNx1/2FPTx48"

3/8" x 1/2" Faucet connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability, chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressuer: 125 psi (pounds per square inch. IAPMO (International Association of Plumbing and Mechanical Officials) listed.

*4" COVER DRAIN

Gripping fingers fit snugly inside pipe keeping strainer securely in place. Heavy-gauge stainless steel; 100\% corrosion proof.

*3" COVER DRAIN

Gripping fingers fit snugly inside pipe keeping strainer securely in place. Heavy-gauge stainless steel; 100\% corrosion proof.

PFISTER BIBB SEAT***************

Seat for Price Pfister. Manufactured to include no more than 0.25\% wieghted average lead content on wetted surfaces.

PFISTER STEM EXTENSION

Stem extension for 2-handle faucets. Provides additional length for faucet stems.

1-1/2x12 SINK TAILPIECE

Plastic sink tailpiece 1-1/2". Do it hang tagged.

AERATOR WASHER

Fits most aerators. 2 per card.

AERATOR SCREEN

11/16 In. screen fits most aerators. 2 per card.

6' PRESSURE HOSE

High pressure with 3/4" Female hose couplings. 700 P.S.I. - hot burst, 800 P.S.I. - cold burst, at 180 deg. F. Packed 1 per bag.

5' PRESSURE HOSE

High pressure with 3/4" Female hose couplings. 700 P.S.I. - hot burst, 800 P.S.I. - cold burst, at 180 deg. F. Packed 1 per bag.

CHR TRIPLEVER BATH DRAIN

Do it trip lever bath drain. 1-1/2" diameter tubing. For use on bathtub with concealed drain. Plastic body. White plastic strainer. Polished chrome trim. Do it carded.

3/4" UTILITY HOSE

For low pressure use. 3/4" Female hose thread on 1 end. 5' long. Packed 1 per bag.

*AS HANDLES FAUCET

OEM style metal faucet and diverter handles for American Standard brand. Carded.

3/4" BALL HOSE BIBB

Forged brass hose bibb M.I.P. Rated for 200 P.S.I. WOG. Quarter turn ball valve construction. Large flow rate. Pipe ends comply with ANSI B1.20.1. Hose ends comply with ANSI B1.20.7.

1/2" BALL HOSE BIBB

Forged brass hose bibb M.I.P. Rated for 200 P.S.I. WOG. Quarter turn ball valve construction. Large flow rate. Pipe ends comply with ANSI B1.20.1. Hose ends comply with ANSI B1.20.7.

4PK TANK/BOWL WASHER

Tank bolt cloth inserted washers. 1-3/32" O.D. x 15/32" I.D. x 1/8" thick. Flat rubber. Black. 4-piece. Do it carded.

FAUCET HOLE COVER

Masks unused spray or faucet hole. Includes wing nut. Carded.

1-1/2x6 SINK TAILPIECE

Plastic sink tailpiece 1-1/2". Do it hang tagged.

1-1/2" DIE-CAST S/J NUT

Chrome-plated die-cast nut with poly washer. 1 set per bag. Do it bagged.

1-1/2x1-1/4 SJ WSHR& NUT

Chrome-plated die-cast nut with poly washer. 1 set per bag. Do it bagged.

NUT/WASHER 1-1/4SJ

Chrome-plated die-cast nut with poly washer. 1 set per bag. Do it bagged.